Drippy 480ml Epoxy Resin Coating Pack

Australian Owned Drippy range of Epoxy Resin is pourable, self-levelling and is scratch and water resistant, leaving you with a high gloss finish with unparalleled depth and clarity.

It is designed to use within all epoxy art resin coating and step casting applications such as wall art, small mould casting, chopping boards, homewares applications, countertops and surface coatings.

It is NOT suitable for large castings.

Drippy epoxy art resin is a two-part epoxy resin with a 1:1 mixing ratio, meaning you mix equal parts of A and B together. Drippy epoxy resin is touch dry after 12 hours and fully cured after 24hrs. It has a working time of 30-40 minutes depending on your room temperature.

A 480ml pack is enough resin to cover a surface area up to 60cm x 60cm.

How to use:

• Mix equal parts of A and B in a disposable cup or silicone mixing jug. Stir thoroughly for 2 minutes to combine
• If you are colouring your resin, add your chosen colours into disposable cups, pour in your resin and mix until the pigment is thoroughly incorporated
• Do your thing! Stop messing with it at the 40 minute mark as it will begin to cure. Resin will be touch-dry in 12 hours and completely cured in 24 hours.

Safety precautions to take when working with epoxy resin:

• Keep out of reach of children
• Read Safety Data Sheet before use
• Do not ingest, get on skin, in eyes, or on clothing
• Use only in a well-ventilated area
• Wear protective gloves/protective clothing/eye and face protection
• In case of inadequate ventilation, wear respiratory protection
• If skin irritation or rash occurs, get medical attention

All Drippy kits and Extra Drippy Resin packs come with a comprehensive Safety Data Sheet and instructions for use and it is crucial that these are read and understood before use.

You can view/download the Safety Data Sheet/Technical Data Sheet for our 1:1 Epoxy resin here