Resin Art 609 1:1 - 8lt Kit

Kit Includes:

1 x 4L Part A Bottle

1 x 4L Part B Bottle

Resin Art 609 is a clear, flexible two part epoxy resin designed to be used thinly over large surface areas. Resin Art 609 is ideal when a high degree of impact resistance and a smooth even finish is required.
Resin Art 609 is tough, flexible, water clear, self levelling, glass like epoxy coating system. Recommended for resin art, decoupage and coating wood, photographs and large surface areas.

*The Resin is NOT designed for Casting or Moulding

Resin Art ✔  Coating Wood ✔  Timber ✔  Canvas ✔  Large Surface Areas ✔  Decoupage ✔ Chopping Boards ✔ Food Contact Safe ✔

• Mixing Ratio 1:1 Volume
• Working time 20min @ 25° C
• Low Viscosity
• Ultra Clear Finish
• UV Resistant
• Self Leveling

Pour Depth 1 mm – 2 mm

Temperature Resistance – up to 80 degrees Celsius

Curing temp 20°C

Full Cure 3 days

COVERAGE:

1 Combined litre, 500ml Part A & 500ml Part B will cover approximately 1 sq mtr @ 1mm Depth

APPLICATIONS:

A tough flexible, water clear, self levelling glass like epoxy coating system. Poured over existing art work, a single coating can equal 50 coats of varnish. Resin Art 609 is a new art medium, when used with pigments and dyes it gives a deep 3D glass art look,
also recommended for decoupage and coating wood, photographs and metal
badges.

DIRECTIONS:

Ensure that the object to be coated is clean and dry, but most importantly set up the object on a plastic covered level surface. Establish the surface is level using a spirit level.

MIX RATIO:

1 part A to 1 part B by volume. Mix thoroughly in a straight sided, flat bottomed container. Do not mix in an ice cream container. Use a flat ruler shaped mixing stick. Mix well scraping around the sides and base of the container. Mix until the material is crystal clear free of any streaks. 

PRODUCT STORAGE:
Always keep caps on bottles when not in use. Store at room temperature (18°) away from direct sunlight.
Do not store on concrete floors.

SAFETY DIRECTIONS:
Work in a well-ventilated area. Avoid contact with eyes and skin. Wear protective gloves and glasses when mixing and using. Over-exposure may cause sensitization. Uncured material can be removed with a solvent or methylated spirit followed by washing
with warm soapy water. Always wear a mask when using any solvent cleaner.